Features
- Selectable Weighing Units Lb, kg, oz, g, lb-oz
- Time and Date Clock
- LED or LCD Display
- Panel Mounting
- Remote Tare, Print, Zero
Applications
- Checkweighing
- Process Control
- Food Processing
- General Industrial Weighing
- Inventory Control and Counting
- General Agricultural
Specifications
COMMUNICATIONS
Port 1 RS232 bi-directional serial port or RS485 Opt. Or 20mA Opt
Data Output String Fourteen (14) selectable fixed-format transmissions available, 1 custom format (programmable via RS232)
Protocol Selectable
Baud Rate 150-9600 bps
DISPLAY
LED 6-digit weight display, 0.8" (22mm) height
LED 11 LED annunciators for operational status
LCD 6-digit weight display, 1" (25mm) height
LCD 11 LCD annunciators for operational status
LCD Includes LCD checkweight/sort bar
ELECTRICAL
Power Requirement Zinc die cast enclosure: 12 - 26 VAC/ 12 -36 VDC
Power Requirement Stainless steel enclosure: 90 - 250 VAC/ 12 -36 VDC
Excitation Voltage 10 VDC, short circuit protected
Max. Excitation Current 180 mA, power (6) 350 ohm bridge
Fuse 0.8A Slow - Blow (when using AC power)
Signal Input Sensitivity 0.1 - 20 mV/V
Signal Connection 4 or 6 lead with sense leads
ENCLOSURE
Zinc Die Cast Black powder coat paint, self-standing on flat surface
Stainless Steel Designed to NEMA 4X, IP65 included swivel bracket/stand
Shipping Weight 7lb (3.2 kg) zinc die cast
Shipping Weight 6lb (2.7 kg) Stainless Steel Enclosure
Keypad 5 key, durable elastomeric (rubber)
PERFORMANCE
Full Scale(F.S.) Selectable 0 to 999,999
Resolution 20-bit A/D converter, 100,000d displayed
Resolution 1,000,000d internal
A/D Conversion 60 Hz
Zero Track 0 - 100% of F.S.
Zero Range Selectable, 0.01-100% Full Scale
Operating Temperature -10 Degrees Centigrade to +40 Degrees Centigrade
Units of Measure lb, kg, oz, g, lb oz
Warranty 2 year limited
Non-Linearity 0.005% Full Scale, Load Cell dependent
Time/Date Clock Volatile
PROCESS CONTROL
Outputs Selectable modes such as target and preact learn
Outputs Annuciators and baragraph (LDC only) indicate status on both LED and LCD displays.
Outputs Relay output module is optional (3 outputs)
Remote Input 1 momentary contact closure (100ms minimum) Tare, Print, Zero, activate output